EMC for wide range of electronics devices -- Emission and Immunity Testing
Tokyo Lab. is preferably close to Tokyo metropolitan area, taking only 30-40 minutes by train, and is also easily accessible by car only to require 15-30 minute drive from each exit of Tokyo's two main express ways, Tomei and Chuo.
Equipped with the semi-anechoic chambers for testing at 3m/10m measurement distance, our test engineers are all well trained and experienced to offer you high-quality EMC testing services for all the electronic devices including medical / measurement / IT devices as well as automotive components.
Six customers can use the test facilities at the same time with separate entrances to carry in their products, which keeps customers' top confidential matters secure and safe.
Anechoic chamber for testing at 10 m measurement distance |
Registered to FCC and VCCI / CE marking possible | 1 |
---|---|---|
Anechoic chamber for testing at 3m measurement distance |
Registered to FCC and VCCI / CE marking possible |
1 |
Small semi-anechoic chamber | EMC testing for Automotive, Military, Aerospace electronics | 1基 |
シールドルーム | EMC testing for Automotive, Military,
Aerospace electronics(Conducted) |
3基 |
200V/mの電界強度試験10kHz-18GHz Testing for 200V/m electric field strength at 10KHz-18GHz |
||
Complete set of the test equipment suitable for VCCI / FCC / CE / MIL / JASO and others | ||
Various power supplies for EUT: AC40~400Hz/9kVA/3φ、DC60V/60A, etc. |
Room No. | No.1 | No.5 | No.6 | |
---|---|---|---|---|
Specs | 10m Anechoic Chamber | 3m Anechoic Chamber | Small Anechoic Chamber | |
Facilitiy Dimensions (W×L×H)(m) |
14(12)×21×9.5 | 6×9×5.5 | 5x6x3 | |
Product Entrance Dimensions (of anechoic chambers) (W×H)(m) |
1.8×1.8 | 1.2×2 | 1×2 | |
Turn-table | Diameter (m) |
3.1m | 1.5m | - |
Load Capacity (t) | 1 | 0.5 | 0.5 | |
Power Supply | Single phase | 6kVA 70~264V 50/60Hz |
6kVA 70~264V 50/60Hz |
6kVA 70~264V 50/60Hz |
Three phase Four lines |
6kVA 70~264V 40~500Hz |
6kVA 70~264V 40~500Hz |
- | |
DC | DC60V60A |
DC60V60A |
DC60V60A |
|
Measurement Distance | 1m/3m/10m | 1m/3m | 1m | |
EUT Dimensions that can be carried in (m) | 2×1.8 | 1×1.8 | 1×1.8 |
No. | No.2 | No.3 |
No.4 | |
---|---|---|---|---|
Specs | ||||
Facilitiy Dimensions (W×L×H)(m) | 4×5×3 | 5×6×3 | 5×6×3 | |
Product Entrance Dimensions (of anechoic chambers) (W×H)(m) |
1×2 | 1×2 | 1×2 | |
Load Capacity (t) | 0.5 | 0.5 | 0.5 | |
Power Supply | Single phase | 6kVA 70~264V 50/60Hz |
6kVA 70~264V 50/60Hz |
6kVA 70~264V 50/60Hz |
Three phase Four lines | 6kVA 70~264V 50/60Hz |
6kVA 70~264V 50/60Hz |
6kVA 70~264V 50/60Hz |
|
DC | DC60V30A | DC60V30A | DC60V30A | |
EUT Dimensions that can be carried in (W×L×H)(m) | 1×1.8 | 1×1.8 | 1×1.8 |
Test Item | Specifications |
---|---|
Electric Field Strength Measurement | 10kHz~26GHz(CISPR Pub.25 Level5対応) |
Magnetic Field Strength Measurement | DC~30MHz |
Conducted Emission Voltage | DC~108MHz |
Mains Harmonic Measurement | 100~240V/16A |
Voltage Variation, Flicker Measurement | 100~240V/16A |
Test Item | Specifications | |
---|---|---|
Electrostatic Discharge Test | 200V~30kV EN61000-4-2/ISO10605 |
|
Radiated Immunity Test | Strip Line & Antenna method |
|
TEM Cell | Frequency Range:10kHz~400MHz | |
Strip Line | Frequency Range:10kHz~200MHz | |
Proximity Antenna | Each frequency between 27MHz~1950MHz | |
EFT/Burst Immunity Test | Maximum Test Voltage: ±4.4kV | |
Lightning Surge Immunity Test | Maximum Test Voltage: ±6.6kV 1.2/50(8/20)μs | |
Conducted Immunity Test | Maximum Test Voltage:30V Frequency Range:10kHz~2GHz |
|
Induced Magnetic Field Immunity Test | Maximum Test Voltage:30A/m Frequency Range:30Hz~100kHz |
|
Power Voltage Variation Test | DC~240V(Single phase) EN61000-4-11/JASO D001-94/, etc. | |
Low Frequency Conducted Immunity Test | 5V(100W) Frequency Range:30Hz~250kHz | |
Conducted Transient Immunity Test | ISO7637/JASO D001-94/, etc. | |
Damped Oscillatory Wave Immunity Test | 1.5MHz(IEEE/ANSI C37.90a-1978) |
* Please don't hesitate to ask anything you require.